Intake Manifold Assemble
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | MAP Sensor Manifold Absolute Pressure Sensor |
| 2 | Manifold Absolute Pressure Sensor Bolt
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 3 | Throttle Body Gasket
NOTE:
Install a NEW gasket. It is not reusable. |
| 4 | Throttle Body |
| 5 | Throttle Body Bolt Tighten 11 N.m (97 lb in) |