Drive Belt Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Drive Belt Routing

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Fan Blade Clutch Replacement (LWN)
1	Drive Belt Tensioner Procedure Rotate the drive belt tensioner clockwise to release the drive belt tension.
2	Drive Belt Procedure Remove the drive belt from the pulleys and tensioner. Clean and inspect the drive belt surfaces of all the pulleys for damage and proper alignment

Callout

Component Name

Drive Belt Tensioner
Procedure
Rotate the drive belt tensioner clockwise to release the drive belt tension.

Drive Belt

Procedure

Remove the drive belt from the pulleys and tensioner.
Clean and inspect the drive belt surfaces of all the pulleys for damage and proper alignment