Cylinder Head Core Hole Plug Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Engine Cover Replacement Cooling System Draining and Filling (Static Fill LWN) , or Cooling System Draining and Filling (GE 47716 LWN)
1	Cylinder Head Core Hole Plug CAUTION: Refer to Fastener Caution . Tighten 60 N.m (44 lb ft) NOTE: Remove and DISCARD the cylinder head core hole plug.

Callout

Component Name

Preliminary Procedures

Cylinder Head Core Hole Plug

CAUTION:

Tighten
60 N.m (44 lb ft)

NOTE:

Remove and DISCARD the cylinder head core hole plug.