Camshaft Removal
WARNING: This page is about a different variant/trim than selected.
Remove the camshaft position sensor bolt (1) and sensor (2).
- Remove and discard the camshaft position sensor seal (3).
Remove the camshaft cap bolts in sequence.
- NOTE:
Mark the camshaft caps before removal to ensure installation in their original location.
Remove the camshaft caps (3 - 4).
- Remove the camshaft exhaust cap (2) and camshaft intake seal (1).
Remove the exhaust camshaft (1) and intake camshaft (2).
Remove the valve rocker arm and lifters (1) as an assembly.