Circuit/System Testing
WARNING: This page is about a different variant/trim than selected.
- Perform the scan tool control function : Cylinder Power Balance - Enable
Verify the sound of the engine changes the same way when turning off each individual injector.
- If the engine sound does not change the same way for one or more cylinders
- Perform a conventional engine compression test. Refer to : Engine Compression Test
Verify each cylinder has sufficient compression.
- If one or more cylinders indicate low compression - Refer to : Symptoms - Engine Mechanical
- If all cylinders indicate normal compression - Replace the appropriate component : Q17 Fuel Injector
- Go to next step : If the engine sound changes the same way for all cylinders
- All OK.