Engine Block - Left/Right Side Views
WARNING: This page is about a different variant/trim than selected.
Engine Block - Left/Right Side Views
| Hole | Thread Size | Insert | Drill | Counterbore Tool | Tap | Driver | Drill Depth - Maximum mm (in) | Tap Depth - Maximum mm (in) |
|---|---|---|---|---|---|---|---|---|
| Standard Bolts J-42385- | ||||||||
| 1 | M8 x 1.25 | 210 | 206 | 207 | 208 | 209 | 23.0 (0.907) | 23.0 (0.907) |
| 2 | M10 x 1.25 | 420 | 211 | 212 | 213 | 214 | 34.0 (1.35) | 34.0 (1.35) |
| 3 | M8 x 1.25 | 61 | 206 | 207 | 208 | 209 | 29.0 (1.14) | 29.0 (1.14) |
| 4 | M12 x 1.75 | 865 | 856 | 857 | 858 | 859 | 16.0 (0.629) | 16.0 (0.629) |
| 5 | M12 x 1.75 | 62 | 856 | 857 | 858 | 859 | 23.0 (0.907) | 23.0 (0.907) |
| Head Bolts EN-42385- | ||||||||
| 6 | M12 x 1.75 | 58 | 51 | N/A | 52 | 53 | 58.0 (2.28) | 58.0 (2.28) |
| Refer to Thread Repair for head bolt thread repair hardware and procedure. | ||||||||