Cylinder Head - Top/End Views
WARNING: This page is about a different variant/trim than selected.
Cylinder Head - Top/End Views
| Hole | Thread Size | Insert | Drill | Counterbore Tool | Tap | Driver | Drill Depth - Maximum mm (in) | Tap Depth - Maximum mm (in) |
|---|---|---|---|---|---|---|---|---|
| J-42385- | ||||||||
| 1 | M8 x 1.25 | N/A | N/A | N/A | N/A | N/A | 23.0 (0.907) | 23.0 (0.907) |
| 2 | M6 x 1.0 | 205 | 201 | 202 | 203 | 204 | 23.0 (0.907) | 23.0 (0.907) |
| 3 | M10 x 1.5 | 420 | 211 | 212 | 213 | 214 | 30.0 (1.18) | 30.0 (1.18) |
| 4 | M8 x 1.25 | 210 | 206 | 207 | 208 | 209 | 23.0 (0.907) | 23.0 (0.907) |
| Bolt Hole 1 (Rocker Arm Supports) are not serviceable. | ||||||||