LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 4.3L (LV1)) >> Repair Instructions >> Valve Rocker Arm and Push Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4807861Courtesy of GENERAL MOTORS COMPANY

    Valve Rocker Arm Cover (2) - Remove - Valve Rocker Arm Cover Replacement - Left Side , or Valve Rocker Arm Cover Replacement - Right Side 

  2. GM4859199Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Place the valve rocker arms, valve pushrods, and pivot support, in a rack so that they can be installed in the same location from which they were removed.

    Remove the valve rocker arm and bolt assembly (1).

  3. Remove the pushrod (2).
  4. Clean and inspect the rocker arms and/or pushrods, if necessary. Valve Rocker Arm and Push Rod Cleaning and Inspection .
scientia non olet · About LEMON Manuals