Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Cylinder Head - Remove - Cylinder Head Replacement - Left Side , or Cylinder Head Replacement - Right Side
Valve Lifter Guide Bolt (1) - Remove [2x]
- Valve Lifter Guide (2) - Remove [2x]
- Valve Lifter (3) - Remove [6x]
- Organize or mark the components so they can be installed in the same location from which they were removed. Separating Parts
- For valve lifter and guide cleaning and inspection. Valve Lifter and Guide Cleaning and Inspection
NOTE:
Installed position of the guides - the notched area of the guide must align with the locating tab of the block.