Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- NOTE:
- When reusing the valve lifters, install the lifters to their original location.
- If camshaft replacement is required, the valve lifters must also be replaced.
Lubricate the valve lifters (1) and engine block valve lifter bores with clean engine oil.
Valve Lifter (3) - Install [6x]
- Valve Lifter Guide (2) - Install [2x]
- Valve Lifter Guide Bolt (1) - Install [2x] - Valve Lifter Installation
- Cylinder Head - Install - Valve Lifter Installation , Cylinder Head Replacement - Left Side , or Cylinder Head Replacement - Right Side