LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 4.3L (LV1)) >> Repair Instructions >> Oil Level Indicator Tube Replacement (Upper) >> Installation procedure

Installation procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4859998Courtesy of GENERAL MOTORS COMPANY

    If installing a NEW oil level indicator tube seal (2), lubricate it with clean engine oil. Adhesives, Fluids, Lubricants, and Sealers 

  2. Oil Level Indicator Tube (1) - Install
  3. GM4859978Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator Tube Bracket Bolt (1) - Install and tighten 25 N.m (18 lb ft)

  4. GM4854159Courtesy of GENERAL MOTORS COMPANY

    Engine Cover (1) - Install - Engine Cover Replacement

  5. GM4858901Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator Tube Bracket Bolt (1) - Install and tighten 10 N.m (89 lb in)

  6. GM4858869Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator Tube Bracket Bolt (2) - Install and tighten 10 N.m (89 lb in)

  7. Oil Level Indicator (1) - Install
  8. Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement
scientia non olet · About LEMON Manuals