Intake Manifold Cover Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Positive Crankcase Ventilation Tube Procedure The PCV tube is connected to the intake manifold and the engine via a plastic collar quick connect fitting. To remove the PCV tube, refer to Plastic Collar Quick Connect Fitting Service .
2	Intake Manifold Cover Bolt
3	Intake Manifold Cover

Callout

Component Name

Positive Crankcase Ventilation Tube

Procedure

The PCV tube is connected to the intake manifold and the engine via a plastic collar quick connect fitting.
To remove the PCV tube, refer to Plastic Collar Quick Connect Fitting Service .

Intake Manifold Cover Bolt

Intake Manifold Cover