Intake Manifold Cover Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Intake Manifold Cover
2	Intake Manifold Cover Bolt CAUTION: Refer to Fastener Caution . tighten 4.5 N.m (40 in lb)
3	Positive Crankcase Ventilation Tube Procedure The positive crankcase ventilation tube is connected to the intake manifold and the engine via a plastic collar quick connect fitting. To install the positive crankcase ventilation tube Plastic Collar Quick Connect Fitting Service .

Callout

Component Name

Intake Manifold Cover

Intake Manifold Cover Bolt

CAUTION:

tighten
4.5 N.m (40 in lb)

Positive Crankcase Ventilation Tube

Procedure

The positive crankcase ventilation tube is connected to the intake manifold and the engine via a plastic collar quick connect fitting.
To install the positive crankcase ventilation tube Plastic Collar Quick Connect Fitting Service .