Engine Block Valley Cover Assemble
WARNING: This page is about a different variant/trim than selected.
Engine Block Valley Cover Assemble
| Callout | Component Name |
|---|---|
| 1 | Balance Shaft Driven Sprocket |
| 2 | Balance Shaft Driven Sprocket Bolt tighten 58 N.m (43 lb ft) |
| 3 | Oil Pressure Sensor Procedure Apply sealant GM P/N 12346004 (Canadian P/N 10953480) to the threads of the sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers . tighten 35 N.m (26 lb ft) |
| 4 | Engine Block Valley Cover Plug
CAUTION:
Refer to Fastener Caution . Procedure Apply sealant GM P/N 12346004 (Canadian P/N 10953480) to the threads of the plug. Refer to Adhesives, Fluids, Lubricants, and Sealers . tighten 30 N.m (22 lb ft) |