Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use care when handling the crankshaft. Avoid damage to the bearing surfaces or the lobes of the crankshaft position (CKP) reluctor ring. Damage to the teeth of the CKP reluctor ring may affect on-board diagnostics (OBD) II system performance.

Clean the crankshaft with solvent.
Thoroughly clean all oil passages (2) and inspect for restrictions or burrs.

WARNING:

Refer to Safety Glasses Warning .

Dry the crankshaft with compressed air.