LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 4.3L (LV1)) >> Repair Instructions >> Air Conditioning Compressor Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Drive Belt - Remove - Drive Belt Replacement - Accessory
  2. GM4604111Courtesy of GENERAL MOTORS COMPANY

    Insert the EN-51767-5  Webbing (1) between the pulley (2) and belt (3).

  3. While walking the EN-51767-5  Webbing around the circumference of the pulley, rotate the crankshaft pulley counterclockwise.
  4. Once the EN-51767-5  Webbing is around the circumference of the crankshaft pulley, pull the loose end of the EN-51767-5  Webbing inward toward the engine, removing the belt from the crankshaft pulley.
  5. Remove the belt from the air conditioning compressor pulley and then from the vehicle.
scientia non olet · About LEMON Manuals