LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Upper Roller Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM334049Courtesy of GENERAL MOTORS COMPANY

    Install the sliding door upper roller bracket to the vehicle.

  2. Install the sliding door upper roller bracket to the rear of the upper track.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the bolts that retain the upper roller bracket to the door and tighten to 25 N.m (18 lb ft).
  4. Install the sliding side door upper track garnish molding. Refer to Rear Side Door Upper Track Garnish Molding Replacement .
  5. Install the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement .
  6. Install the sliding side door upper roller bracket cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement .
scientia non olet · About LEMON Manuals