LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Center Roller Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM334047Courtesy of GENERAL MOTORS COMPANY

    Install the sliding side door center roller bracket (1) to the vehicle.

  2. Slide the sliding side door center roller bracket (1) into the rear of the track.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the nuts (2) in order to retain the sliding side door center roller bracket (1) to the door and tighten to 25 N.m (18 lb ft).
  4. Install the bolts (4) in order to retain the sliding side door center roller bracket (1) to the door and tighten to 25 N.m (18 lb ft).
  5. Install the sliding door trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .
  6. Close the door and inspect the operation of the door.
scientia non olet · About LEMON Manuals