Sliding Rear Side Door Trim Panel Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Sliding Door Inside Handle Replacement Rear Side Door Garnish Molding Replacement
1	Rear Side Door Inside Handle Bezel Procedure Use a flat bladed plastic trim tool.
2	Sliding Rear Side Door Trim Panel Procedure Use an appropriate trim tool to carefully disengage the retainers around the outside edges of the lower portion of the door trim panel. { If equipped } Disconnect the electrical connector. Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Sliding Door Inside Handle Replacement
Rear Side Door Garnish Molding Replacement

Rear Side Door Inside Handle Bezel
Procedure
Use a flat bladed plastic trim tool.

Sliding Rear Side Door Trim Panel

Procedure

Use an appropriate trim tool to carefully disengage the retainers around the outside edges of the lower portion of the door trim panel.
{ If equipped } Disconnect the electrical connector.
Transfer components as necessary.