Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Transfer components as necessary.
Front Fender(1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Fender Bolt(1) - Install and tighten[2x]25N.m (18 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Front Fender Rivet(1) - Install[2x]
Courtesy of GENERAL MOTORS COMPANY

Front Fender Front Lower Reinforcement Extension (1) - Install - Front Fender Front Lower Reinforcement Extension Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Fender Upper Rear Molding(1) - Install - Front Fender Upper Rear Molding Replacement
Courtesy of GENERAL MOTORS COMPANY

Hood(1) - Install - Hood Replacement
Courtesy of GENERAL MOTORS COMPANY

Air Inlet Grille Panel(1) - Install - Air Inlet Grille Panel Replacement (Left Side)Air Inlet Grille Panel Replacement (Right Side)
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Upper Baffle(1) - Install - Radiator Air Upper Baffle Replacement (LWN)Radiator Air Upper Baffle Replacement (LV1)Radiator Air Upper Baffle Replacement (L96, LC8)