LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Exterior Trim) >> Repair Instructions >> Front Fender Upper Rear Molding Replacement

Front Fender Upper Rear Molding Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
GM4842483Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Refer to Eye Protection Warning .

Preliminary Procedure Open the front side door.
1 Front Fender Upper Rear Molding Rivet [2x]
2 Front Fender Upper Rear Molding

Procedure

  1. Apply a suitable tape around the front fender upper rear molding.
  2. Using a suitable trim-type release tool, carefully release the front fender upper rear molding retainer.
scientia non olet · About LEMON Manuals