Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
Front Shock Absorber (2) - Remove - Shock Absorber Replacement
- Front Stabilizer Shaft Link - Remove - Stabilizer Shaft Link Replacement
Front Coil Spring (2) - Remove - Front Spring Replacement (without C7I) , or Front Spring Replacement (with C7I)
Front Lower Control Arm (1) - Remove - Lower Control Arm Replacement
- Secure the front lower control arm in a vise.
- Use an appropriate chisel to remove the 4 securing crimps from the front lower control arm ball stud body.
- Secure the front lower control arm in a hydraulic press.
Using the hydraulic press, remove the front lower control arm ball stud (1) from the front lower control arm (2).