LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Power Steering System) >> Repair Instructions >> Power Steering Pump Pulley Replacement (Without LWN) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM643361Courtesy of GENERAL MOTORS COMPANY

    Place the power steering pump pulley on the end of the power steering pump shaft.(2)

  2. Use the CH-25033 - C  installer (1) to install the power steering pump pulley.
  3. GM245012Courtesy of GENERAL MOTORS COMPANY

    Ensure the power steering pump pulley (1) is flush against the power steering pump shaft (2) with an allowable variance of 0.25 mm (0.010 in).

  4. Drive Belt - Accessory - Install - Drive Belt Replacement - Accessory
  5. { If equipped }Engine Coolant Fan Upper Shroud - Install - Engine Coolant Fan Upper Shroud Replacement (LWN) , or Engine Coolant Fan Upper Shroud Replacement (LV1) , or Engine Coolant Fan Upper Shroud Replacement (L96, LC8)