Installation Procedure
Mode Valve (1) - Install
Mode Valve Actuator (3) @ Mode Valve - Install
- Air Inlet Valve Actuator (2) @ Mode Valve - Install
- Mixer Valve Link (1) @ Mode Valve - Install
Heater Core Upper Cover (1) - Install
- CAUTION:
Refer to Fastener Caution .
Heater Core Cover Screw (1) - Install and tighten 1.9 N.m (17 lb in)
Heater Core Cover Screw (1) - Install and tighten [3x] 1.9 N.m (17 lb in)
Instrument Panel Carrier (1) - Install - Instrument Panel Carrier Replacement
Engine Cover (1) - Install - Engine Cover Replacement
Instrument Airbag Panel Module (2) - Install - Instrument Panel Airbag Replacement
Instrument Panel Trim Pad (2) - Install - Instrument Panel Trim Pad Replacement
Instrument Panel Upper Trim Panel (1) - Install - Instrument Panel Upper Trim Panel Replacement
Instrument Panel Extension (1) - Install - Instrument Panel Extension Replacement
Radio (2) - Install - Radio Replacement
Heater and Air Conditioning Control (2) - Install - Heater and Air Conditioning Control Replacement
Instrument Cluster (2) - Install - Instrument Cluster Replacement
Instrument Panel Cluster Trim Plate (1) - Install - Instrument Panel Cluster Trim Plate Replacement
Steering Column (1) - Install - Steering Column Replacement
Instrument Panel Knee Bolster- Left Side (1) - Install - Instrument Panel Knee Bolster Replacement (Left Side)
Instrument Panel Knee Bolster-Right Side (1) - Install - Instrument Panel Knee Bolster Replacement (Right Side)
- Install the left side body hinge pillar trim panel and right side body hinge pillar trim panel. Body Hinge Pillar Trim Panel Replacement
- Install the left side windshield garnish molding and right side windshield garnish molding. Windshield Garnish Molding Replacement