LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Mechanical - 2.8L (LWN) Diesel) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Crankshaft Balancer Replacement  - Remove
  2. Engine Cooling Fan Bracket Replacement  - Remove
  3. Transmission Replacement - Remove
  4. GM4074683Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Rotate the engine as necessary in order to align the EN-51265  locking tool bolt holes to the bolt holes in the crankshaft.

    Install the EN-51265  locking tool.

  5. GM4067107Courtesy of GENERAL MOTORS COMPANY

    Automatic Transmission Flex Plate Bolt(1) - Remove and DISCARD[8x]

  6. Automatic Transmission Flex Plate(2) - Remove
scientia non olet · About LEMON Manuals