Body Side Front Trim Panel Replacement - Left Side

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Rear Bench Seat Removal and Installation (With Bench Seat) , or Rear Bench Seat Removal and Installation (With Split Bench) Upper Pillar Garnish Molding Replacement Body Side Rear Garnish Molding Replacement
1	Body Side Front Trim Panel Retainer Procedure Use a flat bladed plastic trim tool.
2	Body Side Front Trim Panel- Left Side Procedure Use a flat bladed plastic trim tool. Grasp and gently pull inward and forward in order to disengage the retaining tabs. Ensure seat belts are properly seated in the guide slots prior to securing panel.

Callout

Component Name

Preliminary Procedures

Rear Bench Seat Removal and Installation (With Bench Seat) , or Rear Bench Seat Removal and Installation (With Split Bench)
Upper Pillar Garnish Molding Replacement
Body Side Rear Garnish Molding Replacement

Body Side Front Trim Panel Retainer
Procedure
Use a flat bladed plastic trim tool.

Body Side Front Trim Panel- Left Side

Procedure

Use a flat bladed plastic trim tool.
Grasp and gently pull inward and forward in order to disengage the retaining tabs.
Ensure seat belts are properly seated in the guide slots prior to securing panel.