LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Mechanical - 4.3L (LV1)) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement (Upper) >> Installation procedure

Installation procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4859998Courtesy of GENERAL MOTORS COMPANY

    If installing a NEW oil level indicator tube seal (2), lubricate it with clean engine oil. Adhesives, Fluids, Lubricants, and Sealers 

  2. Oil Level Indicator Tube (1) - Install
  3. GM4859978Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator Tube Bracket Bolt (1) - Install and tighten 25 N.m (18 lb ft)

  4. GM4854159Courtesy of GENERAL MOTORS COMPANY

    Engine Cover (1) - Install - Engine Cover Replacement

  5. GM4858901Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator Tube Bracket Bolt (1) - Install and tighten 10 N.m (89 lb in)

  6. GM4858869Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator Tube Bracket Bolt (2) - Install and tighten 10 N.m (89 lb in)

  7. Oil Level Indicator (1) - Install
  8. Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement
scientia non olet · About LEMON Manuals