LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Seat Belts) >> Repair Instructions >> Seat Belt Replacement - Center Rear (with Split Bench) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4867367Courtesy of GENERAL MOTORS COMPANY

    Center Rear Seat Belt (1) - Install

  2. Rear Seat Retractor Cover (2) - Install
  3. GM4867366Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Rear Seat Retractor Bolt - Upper (4) - Install and tighten 52 N.m (38 lb ft)

  4. Rear Seat Cushion Frame Bolt (3) - Install - Rear Seat Back Cushion Frame Replacement (With Bench Seat) , or Rear Seat Back Cushion Frame Replacement (With Split Bench)
  5. Rear Seat Retractor Cover Screw (2) - Install and tighten 2 N.m (18 lb in) [2x]
  6. Rear Seat Retractor Cover Retainer (1) - Install [2x]
  7. GM4867365Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Belt Bezel Screw (1) - Install and tighten 2 N.m (18 lb in) [2x]

  8. GM4854489Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Back Cushion Cover and Pad (1, 2) - Install - Rear Seat Back Cushion Cover and Pad Replacement (With Bench Seat) , or Rear Seat Back Cushion Cover and Pad Replacement (With Split Bench)