Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Battery Positive Cable(2) - Install
- Battery Positive Cable Junction Block Nut(3)@Battery Positive Junction Block (1) - Install and tighten10 N.m (89 lb in)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Retainer(1) - Engage[5x]
- Retainer Clip(2) - Engage
Retainer(1) - Engage[8x]
- Retainer Clip(2) - Engage
Auxiliary Battery Positive Cable Fastener(3)@Auxiliary Battery - Tighten14 N.m (124 lb in)
- Protective Cap(4) - Install
- Retainer Clip(1)@Emission Reduction Fluid Tank(2) - Engage[3x]
- Lower the vehicle.
- Install the battery tray. Battery Tray Replacement
- Connect the primary and auxiliary battery negative cables. Battery Negative Cable Disconnection and Connection (Single Battery) Battery Negative Cable Disconnection and Connection (Dual Battery)
CAUTION:
Refer to Fastener Caution