Roof Side Rail Garnish Molding Replacement - Left Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Upper Pillar Garnish Molding Replacement
1	Roof Side Rail Garnish Molding - Left Side Procedure Use a flat bladed plastic trim tool. Pull downward to disengage the retaining clips. Disconnect the tether clip from the upper roof rail the tether clip MUST be replaced every time the roof side rail garnish molding is removed.

Callout

Component Name

Roof Side Rail Garnish Molding - Left Side

Procedure

Use a flat bladed plastic trim tool.
Pull downward to disengage the retaining clips.
Disconnect the tether clip from the upper roof rail the tether clip MUST be replaced every time the roof side rail garnish molding is removed.