LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Vent Hose Clip Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Remove the plenum front panel. Plenum Front Panel Replacement (LTG LGX) , or Plenum Front Panel Replacement (LT1 LT4)
  2. GM4537758Courtesy of GENERAL MOTORS COMPANY

    Disconnect the transmission vent hose assembly (1) from the transmission vent hose clip bracket (3).

  3. Remove the transmission vent hose clip bracket retaining nut (2).
  4. Remove the transmission vent hose clip bracket (3) from the vehicle.
scientia non olet · About LEMON Manuals