LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Torque Converter Replacement >> Installation Procedure

Installation Procedure

  1. GM4481894Courtesy of GENERAL MOTORS COMPANY

    Torque Converter (2) - Install - Torque Converter Installation and Holding Fixture Removal

    2. WARNING:

    The torque converter must be held to the torque converter housing by a retaining device such as shipping brackets. Without the retaining device, the torque converter may slide forward, disengaging the oil pump, or may fall completely out of the transmission causing personal injury and/or property damage.

  2. Install the converter holding strap (1) DT-21366  Converter Holding Strap to the transmission.
  3. Transmission - Install - Transmission Replacement 
scientia non olet · About LEMON Manuals