Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Assemble the oil pan as necessary. Oil Pan Assemble
- Oil Pan - Install - Oil Pan Installation
Install the lower transmission to engine bolts. Transmission Replacement (M5T with LTG)
- Catalytic Converter Brace Bracket - Install - Catalytic Converter Brace Bracket Replacement (LGX)
- Install the transmission fluid cooler pipe clip bolts at the oil pan. Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With M13, With 1LE Package) , or Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With M5T, With V03) , or Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With M5T, Without V03)
- Engine Mount Bracket [2x] - Install - Engine Mount Bracket Replacement - Left Side , and Engine Mount Bracket Replacement - Right Side
- Engine Oil Cooler Inlet Pipe - Install - Engine Oil Cooler Pipe Replacement (LGX, Inlet) , or Engine Oil Cooler Pipe Replacement (LGX, Outlet)
- Engine Oil Cooler Outlet Pipe - Install - Engine Oil Cooler Pipe Replacement (LGX, Inlet) , or Engine Oil Cooler Pipe Replacement (LGX, Outlet)
Engine Oil Level Indicator Switch (1) - Connect the electrical connector.
- Drivetrain and Front Suspension Cradle - Install - Drivetrain and Front Suspension Cradle Replacement (LGX - Coupe) , or Drivetrain and Front Suspension Cradle Replacement (LGX - Convertible)
- Oil Level Indicator Tube - Install - Oil Level Indicator Tube Replacement
- Fill the engine oil to the proper level with NEW engine oil. Engine Oil and Oil Filter Replacement .
- Fill the engine oil to the proper level with NEW engine oil. Approximate Fluid Capacities , and Adhesives, Fluids, Lubricants, and Sealers
- Start the engine and inspect for leaks.