Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Fuel Pipe Shield (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Fuel Pipe Shield Bolt (1) [2x] - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Fuel Pipe Shield Bolt (1) [2x] - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Fuel Pipe Shield (2) - Install
Plenum Front Panel Replacement (LTG LGX) - Install