Transmission Neutral Position Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Lower the transmission to gain access to the sensor. Refer to Transmission Replacement (MM6 with LT1 Engine, MH3 or MJK with LT4 Engine) , or Transmission Replacement (M13 with LGX Engine) , or Transmission Replacement (M13 with LTG Engine) . |
|
| 1 | Transmission Neutral Position Sensor Fastener (Qty: 2)
CAUTION:
Refer to Fastener Caution . Procedure Clean the threads and apply a threadlocker. Refer to Adhesives, Fluids, Lubricants, and Sealers (MJK, MH3, or MM6) , or Adhesives, Fluids, Lubricants, and Sealers (M13) . Tighten 11 N.m (96 lb in) |
| 2 | Transmission Neutral Position Sensor Assembly |