LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission - TREMEC 6-Speed (M13 MJK Mm6 MH3)) >> Repair Instructions - On Vehicle >> Gear Select/Skip Shift Solenoid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Lower the rear of the transmission to gain access to the gear select/skip shift solenoid. Transmission Control Replacement (MH3, MJK, MM6) , or Transmission Control Replacement (M13) .
  2. Disconnect the gear select/skip shift solenoid electrical connector.
  3. GM4170130Courtesy of GENERAL MOTORS COMPANY

    Using the DT-49293  Gear Select/Skip Shift Solenoid Socket, remove the gear select/skip shift solenoid (1).

scientia non olet · About LEMON Manuals