LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission - TREMEC 6-Speed (M13 MJK Mm6 MH3)) >> Repair Instructions - Off Vehicle >> Shift Control Shaft Cover Assembly Disassemble (MM6)

Shift Control Shaft Cover Assembly Disassemble (MM6)

WARNING: This page is about a different variant/trim than selected.
  1. GM1825021Courtesy of GENERAL MOTORS COMPANY

    Remove the manual transmission selector lever rod swivel retainer (4).

  2. Remove the manual transmission shift lever pin (2).
  3. Remove the manual transmission shift lever rod universal joint assembly (3).
  4. Remove the shift control shaft cover set screw (1).
  5. GM1825025Courtesy of GENERAL MOTORS COMPANY

    Remove the shift control lever shaft pin (1).

  6. Remove the shift control lever (2) and the shift control lever shaft (4).
  7. Remove the shift control shaft cover seal (3).
scientia non olet · About LEMON Manuals