Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
| Circuit | Description |
|---|---|
| B+ | Supplied from a fuse. |
| Control | The output circuit is switched to ground to activate the component. |
| Component | Description |
|---|---|
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |
| M47 Reverse Inhibit Solenoid Actuator | A linear solenoid actuator is an electro-mechanical device that converts electrical power into a mechanical pushing or pulling force or motion. The component is controlled by the control module K20. |
This mechanically actuated switch closes when the reverse gear is engaged.