Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0502
- Accelerator Pedal Position = Greater than a predefined threshold
- Brake Pedal Position = Less than 2%
- Clutch Pedal Position = Greater than 89%
- Engine Speed = 1400 to 6500 RPM
- Engine Torque = Greater than a predefined threshold
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P0503
- Clutch Pedal Position = Greater than 89%
- Ignition Voltage = Greater than 11 V
- Transmission = In Gear
- Vehicle Speed Sensor = Greater than 300 RPM - Last Valid Value
Frequency the DTC runs = Continuously - After the running conditions are met