Clutch Pedal Position Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Clutch Pedal Position Switch Fastener CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Clutch Pedal Position Switch Procedures Disconnect the clutch pedal position switch electrical connector. Perform the clutch pedal position learn procedure. Clutch Pedal Position Learn

Callout

Component Name

Clutch Pedal Position Switch Fastener

CAUTION:

Tighten
2.5 N.m (22 lb in)

Clutch Pedal Position Switch

Procedures