LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (M/T Clutch) >> Repair Instructions >> Clutch Assembly Replacement (M13 Transmission) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4144086Courtesy of GENERAL MOTORS COMPANY

    Remove the manual transmission. Refer to Transmission Replacement (M13 with LGX Engine) , or Transmission Replacement (M13 with LTG Engine) .

  2. Remove the starter. Refer to Starter Replacement (LGX) , or Starter Replacement (LTG) .
  3. Install the EN-50792  tool.
  4. Remove and DISCARD the six clutch pressure plate bolts (1).
  5. Remove the clutch pressure plate (2) from the dowel pins on the flywheel.
  6. Remove the driven disc (3).
scientia non olet · About LEMON Manuals