Turbocharger Coolant Feed Pipe Replacement (LTG without Y4Q)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Cooling System Draining and Filling (GE 47716) , or Cooling System Draining and Filling (Static Fill) Warm Up Three-Way Catalytic Converter Replacement (LTG) Engine Mount Bracket Replacement - Left Side
1	Turbocharger Coolant Feed Hose Clamp Hose Clamp Replacement Guidelines - Spring Type
2	Turbocharger Coolant Feed Pipe Fastener [2x] CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
3	Turbocharger Coolant Feed Pipe Hollow Screw Procedure Install NEW sealing washers. Tighten 35 N.m (26 lb ft)
4	Turbocharger Coolant Feed Pipe Procedure Install a NEW gasket.