Engine Coolant Air Bleed Pipe Replacement (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Cooling System Draining and Filling (GE 47716) , or Cooling System Draining and Filling (Static Fill) Intake Manifold Replacement Radiator Surge Tank Inlet Hose Replacement (LGX) @ Engine Coolant Air Bleed Pipe - Disconnect
1	Engine Coolant Air Bleed Pipe Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Engine Coolant Air Bleed Pipe Procedure Install NEW seals.

Callout

Component Name

Preliminary Procedure

Engine Coolant Air Bleed Pipe Bolt [2x]

CAUTION:

Tighten
10 N.m (89 lb in)

Engine Coolant Air Bleed Pipe
Procedure
Install NEW seals.