Removal Procedure
Heater and Air Conditioning User Interface Control Replacement (2) - Remove
Instrument Cluster Replacement (2) - Remove
Low Frequency Instrument Panel Antenna Replacement (1) - Remove
Instrument Panel Lower Airbag Replacement - Driver Side (2) - Remove
Instrument Panel Lower Trim Panel Bolt (1) - Remove [3x]
Instrument Panel Bolt (1) - Remove [14x]
- Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
- Disconnect the data link connector.
- Remove the hood primary latch release cable handle by pressing the release cable handle upward to release the retainers from the instrument panel bracket.
- Disconnect all electrical connectors.
- With the aid of an assistant, remove the instrument panel lower trim panel (2) from the vehicle.