Instrument Cluster Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Upper Trim Panel Cover Replacement
1	Instrument Cluster Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2. 3 N. m (20 lb in)
2	Instrument Cluster NOTE: The instrument cluster is programmed by a USB port located in the back of the cluster. Procedure Disconnect the electrical connectors. If installing a NEW instrument cluster, program the cluster before installation. Control Module References

Callout

Component Name

Instrument Cluster Bolt [4x]

CAUTION:

Tighten
2. 3 N. m (20 lb in)

Instrument Cluster

NOTE:

The instrument cluster is programmed by a USB port located in the back of the cluster.

Procedure

Disconnect the electrical connectors.
If installing a NEW instrument cluster, program the cluster before installation. Control Module References