Installation Procedure
With the aid of an assistant, position the instrument panel lower trim panel (2) in the vehicle.
- Reposition the instrument panel wiring harness into the vehicle position as was noted in the removal and connect the fasteners securing the instrument panel lower trim panel (2).
- Instrument Panel Bolt (1) - Install and tighten [14x] 2.5 N.m (22 lb in)
Instrument Panel Lower Trim Panel Bolt (1) - Install and tighten [3x] 2.5 N.m (22 lb in)
Steering Column Replacement (1) - Install
Instrument Panel Lower Airbag Replacement - Driver Side (2) - Install
Low Frequency Instrument Panel Antenna Replacement (1) - Install
Instrument Cluster Replacement (2) - Install
Heater and Air Conditioning User Interface Control Replacement (2) - Install
CAUTION:
Refer to Fastener Caution .