Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Install the engine mount (2) to the vehicle.

CAUTION:

Refer to Fastener Caution .

Install the engine mount frame side bracket nuts (1) and tighten to 58 N.m (43 lb ft).
Courtesy of GENERAL MOTORS COMPANY

Install the engine mount frame side bracket bolt (1) and tighten to 58 N.m (43 lb ft).
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Torque-to-Yield Fastener Caution .

Install the NEW engine mount bolts (1) and tighten to 58 N.m (43 lb ft) + 60 to 75 degrees.
Courtesy of GENERAL MOTORS COMPANY

Place the air conditioning evaporator hose (2) to the right position and install the air conditioning evaporator tube bracket nut (1). Refer to Air Conditioning Evaporator Hose Assembly Replacement (L5Q)Air Conditioning Evaporator Hose Assembly Replacement (LV7) .
Remove the engine support fixture. Refer to Engine Support Fixture (LV7) Engine Support Fixture .
Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .