LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Volt Premier >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Mount Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  2. Remove the right front bumper fascia opening lower cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement .
  3. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  4. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  5. Install the engine support fixture. Refer to Engine Support Fixture (LV7) Engine Support Fixture .
  6. Remove the engine mount. Refer to Engine Mount Replacement .
  7. GM4043888Courtesy of GENERAL MOTORS COMPANY

    Remove the engine mount bracket bolts (1).

  8. Remove the engine mount bracket (2) from the engine.
scientia non olet · About LEMON Manuals