LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Intake Manifold Brace Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4376993Courtesy of GENERAL MOTORS COMPANY

    Intake Manifold Brace (3) - Install

    2. CAUTION:

    Fastener Caution

  2. Intake Manifold Brace Bolt (1, 2) - Install and tighten [4x] 10 N.m (89 lb in)
  3. GM4376992Courtesy of GENERAL MOTORS COMPANY

    Engine Wiring Harness (2) - Reposition

  4. Engine Wiring Harness Bracket Bolt (3) - Install and tighten 10 N.m (89 lb in)
  5. Wiring Harness Retainer (1) - Install
  6. Electrical Connector (4) - Connect
scientia non olet · About LEMON Manuals