LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Engine Mount Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
GM2900081Courtesy of GENERAL MOTORS COMPANY
  1. Engine Mount Bracket (2) - Install
    2. CAUTION:

    Fastener Caution

  2. Engine Mount Bracket Bolt (1) - Install NEW [4x] - Hand tighten
    3. CAUTION:

    Torque-to-Yield Fastener Caution

  3. Engine Mount Bracket Bolt (1) - Tighten in sequence [4x]
    1. First Pass: 58 N.m (43 lb ft)
    2. Final Pass: 60 - 75 degrees - Use the special tool: EN-45059  Angle Meter
  4. Install the engine mount. Engine Mount Replacement 
scientia non olet · About LEMON Manuals